June 1, 2020

Installation Guide

How To Install Clear Corner Guards

June 1, 2020

Installation Guide

How To Install Clear Corner Guards

June 1, 2020

Installation Guide

There are three different ways to install clear corner guards based on how you attach them to the corner: screws, nails, or double-sided tape.

How to Choose the Best Way to Install Clear Corner Guards

The strongest adhesion is using screws with pre-drilled holes followed by nails and double-sided tape. While double-sided tape is strong, if there is a significant raised texture on the wall, it will be hard for the tape to stick and may fail. Also, while the tape is clear, you can see it through the corner guard.

How to Install Clear Corner Guards with Nails

  1. Clean and dry the corner
  2. Remove the clear film from the corner guard
  3. Hold the corner guard against the wall and nail in. The corner guard will come with nails. Three nails per side for every 4 ft. corner guard should be used.

How to Install Clear Corner Guards with Screws

  1. Clean and dry the corner
  2. Remove the clear film from the corner guard
  3. The corner guard will come with pre-drilled and counter sunk holes and self-tapping screws. Hold the corner guard against the wall and screw in.

How to Install Clear Corner Guards with Tape

  1. Clean and dry the corner
  2. Remove the clear film from the corner guard
  3. Hold the corner guard against the wall and nail in. The corner guard will come with nails. Three nails per side for every 4 ft. corner guard should be used.

If you need to purchase clear corner guards you can get them here. If you have any questions about the installation processes you can chat with us by click on the orange button in the bottom right side of the screen.